Ralink RT2700E-LNA User Manual page 41

Encryption Type, Config Methods, Device Password ID,
Selected Registrar, State, Version, AP Setup Locked,
UUID-E and RF Bands.
PIN Code
8-digit numbers. It is required to enter PIN Code into
Registrar using PIN method.
Config Mode
Our station role-playing as an Enrollee or an external
Registrar.
Detail
Information about Security and Key in the credential.
Connect
Command to connect to the selected network inside
credentials. The active selected credential is as like as the
active selected Profile.
Rotate
Command to rotate to connect to the next network inside
credentials.
Disconnect
Stop WPS action and disconnect this active link. And
then select the last profile at the Profile Page. If there is
an empty profile page, the driver will select any
non-security AP.
PIN
Start to add to Registrar using PIN (Personal
Identification Number) configuration method. If STA
Registrar, remember that enter PIN Code read from your
Enrollee before starting PIN.
PBC
Start to add to AP using PBC (Push Button
Configuration) method.
WPS associate IE
Send the association request with WPS IE during WPS
setup. It is optional for STA.
WPS probe IE
Send the probe request with WPS IE during WPS setup.
-
35 -