Ralink RT2700E-LNA User Manual page 30

Encryption Shows the encryption type currently in use. Valid value
includes WEP, TKIP, AES, and Not Use.
Signal Shows the receiving signal strength of specified network.
Rescan Click to refresh the AP list.
Connect Select an item on the list and then click to make a
connection.
Add to Profile Select an item on the list and then click to add it into the
profile list.
Link status
Shows the current connection status. If there is no
Status
connection existing, it will show Disconnected.
Extra Info Shows the link status.
Channel Shows the current channel in use.
Authentication mode used within the network, including
Authentication
Unknown, WPA-PSK, WPA2-PSK, WPA and WPA2.
Shows the encryption type currently in use. Valid value
Encryption
includes WEP, TKIP, AES, and Not Use.
Network Type Network type in use, Infrastructure for BSS.
IP Address Shows the IP address information.
Shows the Sub Mask information.
Sub Mask
Default
Shows the default gateway information.
Gateway
Link Quality Shows the connection quality based on signal strength and
-
24 -