Sunrise Internet Box User Manual page 138

A.7 Resetting factory configuration
If you lose your password or if, after having entered new parameters in your Sunrise Internet Box, you
cannot access the Internet nor the HTTP configuration tool, you can restore the normal operation with the
"factory" parameters via the Restore Default procedure.
To reset the default settings and therefore restore the Sunrise Internet Box to its factory configuration, use
one of the following methods:
Important
This operation deletes the entire personalised configuration of your Sunrise
Internet Box: Password, Configuration, customized wireless settings, etc.
After a factory configuration reset, it is necessary to install your Sunrise Internet
Box again, or to enter again the xDSL connection data supplied by Sunrise (your
ISP) (see Internet Connection Section 3.5).
•
Press and hold for about 10 seconds the Reset button located on the left panel of the Sunrise Internet
Box.
•
In the graphical User Interface (http://192.168.1.1), select My Sunrise Internet Box > Maintenance
> Resets> Reset.
When the procedure is finished you will have to enter again your connection ID and connection
password delivered by your Internet Service Provider (see Internet Connection - Section 3.5).
Page 138
Sunrise Internet Box User Manual