Advertisement
™
OneSpace is a Trademark of Comfort Products, Inc.
ASSEMBLY INSTRUCTIONS
MODEL 60-101601
SUPPLIER CODE: ZDTG
Drafting Stool with Tractor Seat, White
CUSTOMER SERVICE
For fastest service on claims, requests for replacement
parts, or questions, please visit our website at
www.comfortproducts.net/support
e-mail: customerservice@comfortproducts.net
Keep your sales receipt as documentation of your ownership.
Advertisement
Table of Contents
Related Manuals for Comfort Products 60-101601
Summary of Contents for Comfort Products 60-101601
- Page 1 ™ OneSpace is a Trademark of Comfort Products, Inc. ASSEMBLY INSTRUCTIONS MODEL 60-101601 SUPPLIER CODE: ZDTG Drafting Stool with Tractor Seat, White CUSTOMER SERVICE For fastest service on claims, requests for replacement parts, or questions, please visit our website at www.comfortproducts.net/support...
-
Page 2: Parts List
CONTENTS (60-101601) EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE. PARTS LIST HARDWARE KIT STOCK # 61-1016HA PART DESCRIPTION STOCK# QTY. PART DESCRIPTION QTY. Glide 61-1016GD M6 x 12mm Screw M6 x 16mm Screw Star Base... - Page 3 ASSEMBLY INSTRUCTIONS (60-101601) STEP 1 STEP 2 Loosen the knob on the foot rest (D). Slide the foot rest Screw the glides (A) into the holes of the star base (B). Use onto the seat post (C) all the way down until it stops. Tight- the open-end wrench (L) to tighten securely.
- Page 4 ASSEMBLY INSTRUCTIONS (60-101601) STEP 6 STEP 5 ATTENTION: Before performing this step, make sure Attach the back bar (F) to the seat plate (G) and seat (H) the plastic cap is removed from the top of the seat using three screws (J) as shown. Tighten with the Allen post.
-
Page 5: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS • WHERE DO I FIND THE MODEL NUMBER FOR MY CHAIR? The chair model number can be found on the front page of this manual, as well as on the warranty page. Please keep this manual for reference. •... - Page 6 FIGURE A TOOLS NEEDED: (1) Newspaper or cardboard for work area, (2) Silicone lubricant (such as WD40),(3) Rubber Mallet INSTRUCTIONS: 1.) Spread newspaper or cardboard on your work surface. 2.) Turn your chair on its side. 3.) Spray lubricant around the center post where connected to your 5-star base. 4.) Remove casters (wheels) from base.
-
Page 7: Limited Warranty
Comfort Products does not guarantee matching color, grain, texture or dye lots. This warranty does not cover the cost of transportation or labor. In no event shall Comfort Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages.
Need help?
Do you have a question about the 60-101601 and is the answer not in the manual?
Questions and answers