Installation Instructions - Sirius Satellite Radio 9351116001063 Installation Instructions Manual

INSTALLATION INSTRUCTIONS

SIDE OR BOTTOM VENTING
(For front or rear venting instructions, see pages 10-12)
STEP 2:
1. Remove front 150mm or 200mm adaptor plate
(Part 'D') (Fig. 3)
2. Replace Part 'D' with front cover plate (Part 'E')
Remove & replace
with Part 'E'
(Fig. 3)
STEP 4:
• Carefully lower downdraft into cutout cabinetry.
• Fix the downdraft inside the cabinet, using the
special fixing brackets (Part ' F') supplied with the
product.
• Insert the brackets in the lower side of the
downdraft in such a way that there is a 2 mm
distance between the lower side of bracket and
the bottom of the cabinet.
• This distance will allow the traction to be
positioned downwards of the product, at the
moment of fixing, in order to have the stain-
less steel trim perfectly adhering with the work
surface.
• Before inserting the screws, please make sure
that the appliance is perfectly perpendicular with
the work surface, ensuring unit is square and
levelled with spirit level before turning on. (Fig. 5)
NB: If the unit is not levelled, the downdraft will
shudder when rising. This could cause damage
to your unit, which is not covered by warranty.
This is installation damage.
STEP 3:
1. Remove side or bottom cover plate (Part C).
(Fig. 4)
2. Connect air outlet collar (Part 'B') to the same
fixing points as removed from side or bottom
cover plate (Part 'C') and tighten.
Remove & replace
with Part 'B'
(Fig. 4)
Part 'F'
2mm
(Fig. 5)
7
S-DD2-L FLUSH TOP
INSTALLATION GUIDE
Remove & replace
with Part 'B'