Connecting Wireless Programming System; And Bluetooth Dongle - Siemens ConnexxLink User Manual

Working with the wireless programming system
When the hearing instruments and the wireless
programming system are lying on the table, do not
exceed a distance of 5 cm (2 in) between hearing in-
struments and wireless programming system.

Connecting wireless programming system

and Bluetooth dongle

Turn the wireless programming system on
by pressing the On / Off button.
When the Bluetooth symbol on the screen
of the wireless programming system stops
blinking, the Bluetooth dongle and the wire-
less programming system are connected.
The wireless programming system will go into stand-
by mode after 15 min of inactivity.
Turn the wireless programming system back on by
pressing the On / Off button.
Start the Connexx detection dialog via the button "De-
tect connected instruments" in the toolbar or on the
hearing instrument's task card.
Choose the wireless programming system as the detec-
tion device.
Follow the steps in Connexx to detect and program the
hearing instruments.
8
11