Advertisement
FAST FOCUS EYEPIECE DESIGN
The eyepiece is designed to provide a precise fast focus. Simply look at a distant object for several seconds without using your
scope. Then, shift your vision quickly, looking though the scope at a plain background. Turn the fast-focus eyepiece clockwise
or counter clockwise until the reticle pattern is sharp and clear.
WARNING: NEVER LOOK AT THE SUN THROUGH THE RIFLESCOPE (OR ANY OTHER OPTICAL
INSTRUMENT). IT MAY PERMANENTLY DAMAGE YOUR EYES.
MOUNTING
To achieve the best accuracy from your rifle, your Bushnell
those unfamiliar with proper procedures have the scope mounted by a qualified gunsmith).
Should you decide to mount it yourself:
1. Use a high-quality mount with bases designed to fit your particular rifle. The scope should be mounted as low as possible
without touching either the barrel or the receiver.
2. Carefully follow the instructions packed with the scope mounts you have selected.
3. Before tightening the mount rings, look through the scope in your normal shooting position. Adjust the scope (either
forward or backward) until you find the furthest point forward (to insure maximum eye relief) that allows you to see a full
field of view.
WARNING: IF THE SCOPE IS NOT MOUNTED FAR ENOUGH FORWARD, ITS REARWARD MOTION MAY
INJURE THE SHOOTER WHEN THE RIFLE RECOILS.
4. Rotate the scope in the rings until the reticle pattern is perpendicular to the bore and the elevation adjustment is on top.
5. Tighten the mounting screws as tight as possible.
scope must be mounted properly. (We strongly recommend that
®
Advertisement
