Hinweise Zur Sicherheit - Watchguard Firebox T15 Quick Start Manual

Hide thumbs Also See for Firebox T15:

Hardware manual (16 pages)

Table of Contents

Available languages

將裝置重設為出廠預設值

若您需要，可以將 Firebox 還原為出廠預設值。例如，若您不知道系統管理員帳戶密碼，

或是想要以 RapidDeploy QuickStart (快速部署快速啟動) 重新開始，您可以重設裝置。

請確認您在升級之前已備份您的設定，以供日後還原之用。

如需詳細資訊，請參閱 Firebox 硬體手冊，網址是：

https://www.watchguard.com/wgrd-help/documentation/hardware-guides

Notices:

All WatchGuard products are designed and tested to meet strict safety requirements. These

requirements include product safety approvals and other global compliance standards. Please read

the following instructions carefully before operating the product, and refer to them as needed to

ensure the continued safe operation of your product. Additional information can be found in the

Hardware Guide located on the WatchGuard website:

http://www.watchguard.com/help/documentation/hardware.asp

Product Safety Certification

The WatchGuard product is safety certified under the following standards:

• CAN/CSA C22.2 No.60950-1-07, Second Edition 2014-10

• UL 60950-1, Second Edition 2014-10-14

• IEC 60950-1, 2005+A1:2009+A2:2013

• EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013

Safety Warning

• Do not place objects on the power cord.

• Do not obstruct the ventilation openings. These openings prevent overheating of the machine.

• Never push objects of any kind into slots or openings on this equipment. Making a contact with a

voltage point or shorting out a part may result in fire or electrical shock.

• When removing or installing an appliance, follow the general installation safety instructions.

• You must disconnect the AC power cord from the Firebox before you remove the cover of the

Firebox for any reason.

• There is risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries

according to the manufacturer's instructions

Disclaimer

WatchGuard shall not be held liable if the end user alters, modifies, or repairs any WatchGuard

hardware appliance.