Introduction
CoLinkEx is a hardware-debugging adapter, which supports SW debugging and supports ARM Cortex M
devices, it supports debugging in CooCox software and Keil RealView MDK. Main features of LPC1343-HB
module. In addition, ColinkEx can supply target board with 3.3V or 5V via JTAG connector
1. Features of CoLinkEX adapter:
Support JTAG and SW interfaces for Cortex-M microcontrollers
Supported in Coocox IDE (COIDE) and Keil RealView MDK (with plugin)
USB-B connector
Support firmware upgrade via USB
Standard 20-pin JTAG connector
Can supply target board with 3.3V or 5V via JTAG connector
4 LEDs for status of programmer
Compact size 55х55х18mm
2. Elements of CoLinkEx programmer
"BUSY" LED
"Connect" LED
"ERROR" LED
USB connector
"PWR" LED
CoLinkEx JTAG/SWD adapter
USB bootloader
jumper, JP1
3V3 voltage regulator
www.bravekit.com
3V3 jumper for
supply target board
3V3 jumper for
supply target board
3