Usb Operation; Bluetooth Operation; Pair Bluetooth-Enabled Devices - Hisense HS211 User Manual

1 Insert the USB device.
2 Press the button on the unit repeatedly or the
the remote control to select USB mode.
3 Play starts automatically. If play does not start automatically,
press /PAIR button.
BF
- To skip to the previous/next track, press the
on the remote control.

Pair Bluetooth-enabled Devices

The first time you connect your bluetooth device to this player, you need to pair your device to this
player.
Note:
- The operational range between this player and a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth device and the unit).
- Before you connect a Bluetooth device to this unit, ensure you know the device's capabilities.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational range.
- If the signal strength is weak, your Bluetooth receiver may disconnect, but it will re-enter pairing
mode automatically.
To connect your device to the unit via Bluetooth, follow the steps below:
1 During ON mode, press the
select Bluetooth mode. The Bluetooth indicator will light flash.
2 Activate your Bluetooth device and select the search mode. "HS211" will appear on your Bluetooth
device list.
If you cannot find the unit, press and hold the "
•
searchable. The system has entered pairing mode. You will hear "Pairing" from the unit and the
Bluetooth indicator will flash fast.
3 Select "HS211" in the pairing list. After the "Paired" voice prompt, the system is successfully
connected and the Bluetooth indicator will light up solidly.
4 Play music from the connected Bluetooth device.
To disconnect the Bluetooth function, you can :
- Switch to another function on the unit.
- Disable the function from your Bluetooth device. The Bluetooth device will be disconnected from the
soundbar after the "Disconnected" voice prompt.
- Press and hold the "
BF

USB Operation

H

Bluetooth Operation

button on the unit repeatedly or the
BF
/PAIR" button on the remote control.
button on
/ buttons
G
button on the remote control to
/PAIR" button on the remote control to be
EN
13