Basic Operation; Standby/On; Select Modes; Adjust The Volume - Hisense HS211 User Manual

Standby/ON

When you first connect the main unit to the mains socket, the main unit will be in Standby mode.
- Press the button on the unit or on the remote control to switch the unit ON.
EN
- Press and hold the
unit back to STANDBY mode. The POWER indicator will light up red.
- Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.
- If the unit is idle for over 15 minutes, the unit will automatically switch to Standby mode.

Select Modes

Press the button on the unit repeatedly or or the
select the AUX, OPTICAL, COAXIAL, HDMI ARC, USB and BT (Bluetooth) mode.
• Red: In STANDBY mode.
• Green: In AUX mode.
• Blue: In Bluetooth mode.
• Orange/Orange flash: In Optical/Coaxial mode.
• White/White flash: In HDMI ARC/USB mode.

Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.
-
- If you wish to turn the sound off, press the
button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume
normal listening.
- While adjusting the volume, the status indicator flashes quickly.
- While the volume level reaches its maximum level, if you press the VOL+ button again, the status
indicator flashes once. While the volume level reaches its minimum level, if you press the VOL- button
again, the status indicator flashes once.

Select a Preset Sound Effect

While playing, press the NEWS or MOVIE or MUSIC buttons on the remote control to select between
preset equalizers: Movie (recommended for viewing movies), Music (recommended for listening to
music), NEWS (recommended for listening to NEWS).

AUX / HDMI ARC / COAXIAL / OPTICAL Operation

1 Ensure that the unit is connected to the TV or audio device.
2 Press the button on the unit repeatedly or the
select the HDMI ARC, COAXIAL, OPTICAL, AUX mode.
3 Operate your audio device directly for playback features.
4 Press the VOL +/– button to adjust the volume to your desired level.
Tip: While in HDMI ARC, COAXIAL, OPTICAL mode, if there's no sound output from the unit and the
status indicator flashes quickly, you may need to activate PCM or Dolby Digital Signal output on your
source device (eg. TV, DVD or Blu-ray player).
12

Basic Operation

button on the unit or press button on the remote control again to switch the
, , HDMI ARC buttons on the remote control to
(MUTE) button on the remote control. Press the MUTE
/ HDMI ARC buttons on the remote control to