Operation - Magnavox MD6920 Owner's Manual

BT (Bluetooth):
1. Slide the Function Selector to "BT." position to power on the unit and enter to BT (Bluetooth) mode. The
"POWER" & "BT." indicator will illuminate and the "BT." indicator will blink.
2. Power on the external BT Device and enter to bluetooth search mode. Select unit once it appears on your
available bluetooth devices, follow the on-screen instructions on your external BT device to complete
pairing. Once paired, the "BT." Indicator will stop blinking. (For details pairing procedures, please refer to
the user's manual of your BT Device.).
Notes:
When the external BT player searches for the unit, model number "MD6920" will appear on the display of
●
external BT device.
Pairing code "0000" or "1234" may need to entered.
●
Normal operation after pairing:
1. Turn on the BT function of the external BT Device.
2. Power on the unit and enter to BT mode as previous procedures.
3. Wait a few seconds until the unit paired to the external BT Device automatically. (The "BT." Indictor stops
blinking).
4. Plays music with the paired BT Device as usual.
5. Turn the "VOLUME" knob to adjust the volume level as desired.
6. When no longer in use, slide the Function Selector to "OFF" position to shut off the unit.
Note: Using the control buttons on the paired BT Device to pause; skip or search for audio files as usual.
Radio:
1. Slide the Function Selector to "RADIO" position to power on the unit and enter to radio FM mode. The
"POWER" indicator will illuminate.
2. Turn the "VOLUME" knob to adjust the volume level as desired.
3. Turn the "TUNING" knob to search and play the desired FM station. or,
● Press the ■ - AM/FM button to enter to radio AM mode, the "AM" indicator will illuminate. (To resume
to FM band, press the button again. The "AM' indictor will not light).
● Turn the "TUNING" knob to search and play the desired AM station.
4. When no longer in use, slide the Function Selector to "OFF" position to p shut off the unit.
Antennas:
This unit has a built in AM/FM antennas, which provides adequate reception in most areas. If reception is weak,
turn or relocate the unit to improve the reception.
CD:
1. Open the CD door then place a CD disc on the center spindle, with the printed label side up.
2. Close the CD Door.
3. Slide the Function Selector to "CD" position to power on the unit and enter to CD mode. The "POWER"
indicator will illuminate.

OPERATION

8