Page 1
WIRELESS REPEATER PH100WR Installation Manual UgMO Technoogies • 840 First, Suite 300 • King of Prussia, PA 19406 • www.UgMO.com...
Page 2
The UgMO ProHome PH100WR Repeater has been developed The AC adaptor can be placed up to 300’ away from the Repeater to provide both improved and extended range between UgMO by splicing suitable wire.
Components UgMO Confidential The Network Controller User Interface. On power-up, you’ll see the following screen. This times out after 10 seconds, or press the Select Button to move on. Power indicator Wireless Repeater Receive OFFLINE POWER (Blinks when a sensor packet is received)
Page 4
Placement of a Repeater Placement of a Repeater The optimal location of a repeater is half-way The optimal location of a repeater is half-way between the base station and the hard-to-see between the base station and the hard-to-see Hard-to-see sensor sensor (Sensor 2) at least 5 feet above the ground.
Checking signal strength View Sensor Screen on Base Station Q Value The top screen to the right is accessible on the ProHome Base Station. Q Value (See page 27 -28 of the user manual) Menu 5 / 6 Q-Value: This number represents the percent of the expected transmissions V i e w S e n s o r s received from a sensor over the past four days or since the Base Station was last Q 0 2 3...
Customer Service: Please visit UgMO.com or call 877-500-UgMO for customer service. This product should not be used for anything other than what is described in this document. This product should only be serviced by trained and autho- rized personnel. FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the ProHome PH100WR and is the answer not in the manual?
Questions and answers