Ad Hoc - Asus WL-100GE User Manual

Chapter 3 - Reference

Ad Hoc

The Wireless LAN card when set to Ad Hoc mode can connect to other wireless
device(s) in a wireless network called an Ad Hoc network. To connect the
Wireless LAN card to another wireless device:
1. Launch the Wireless Settings util-
ity by double-clicking the Control
Center icon in the Windows
bar.
2. Click the Survey button to scan
available wireless device(s) within
the Wireless LAN card's range.
Select the wireless device you
wish to connect. A wireless device
is indicated by this icon (
3. Click the Config button to con-
figure the device settings. Set the
Network type to Ad Hoc, then
enter the Network Name (SSID)
and Channel of wireless device
you wish to connect. Click Ap-
ply when done.
IMPORTANT! The encryption settings of the Wireless LAN card and
the wireless device must be identical to establish a connection.
40
®
task-
).
4. Click the Encryption tab if your
selected wireless device has an
enabled WEP encryption (
Obtain the WEP encryption keys
from the network administrator,
then enter them in the Key 1 ~ 4
fields. Click Apply when finish.
ASUS WLAN Card
).