Configuring With The Wlan Utility (Ad Hoc) - Asus WL-106gM User Manual

Configuring with the WLAN utility (Ad Hoc)
The WLAN card supports Ad Hoc mode which allows communication between
wireless stations without an AP.
1. Right-click the wireless connection icon
and select Wireless Settings.
3. Click the Survey button to scan for Ad
Hoc nodes. Select the node you want to
communicate with and press Connect.
5. Check the Status page to see the association
state. If connection is established, the box
shows "Connected - xx:xx:xx:xx:xx:xx".
Chapter 2 - Installation
2. Click the Config button and set the WLAN
Card to Ad Hoc connection mode.
4. If the encryption settings of your WLAN
Card are different from those of the other
Ad Hoc nodes, you are prompted to make
the encryption of the two nodes identical.
Click Apply to activate the settings.
6. Check the Connection tab to see the
signal strength. Click OK to exit the utility.
ASUS WLAN Card 11