Configuring With The Wlan Utility (Ad Hoc) - Asus WL-130N Quick Start Manual

Configuring with the WLAN utility (Ad Hoc)

The WLAN adapter supports Ad Hoc mode which allows communication
between wireless stations without an AP.
1. Right-click the wireless connection icon
and select Wireless Settings.
3. Click the Survey button to scan for Ad
Hoc nodes. Select the node you want to
communicate with and press Connect.
5. Check the Status page to see the
association state. If connection is
established, the box shows "Connected -
xx:xx:xx:xx:xx:xx".
Quick Start Guide
2. Click the Config button and set the
WLAN Card to. Ad Hoc connection
mode.
4. If the encryption settings of your WLAN
Adapter are different from those of the
other Ad Hoc nodes, you are prompted
to make the encryption of the two nodes
identical. Click Apply to activate the
settings.
6. Check the Connection tab to see the
signal strength. Click OK to exit the
utility.
ASUS WLAN Adapter 5