Audio Playback; Fm Modulator Playback - Vizualogic A-1250 Owner's Manual

Audio Playback

The Vizualogic A-1250 System features multiple ways to enjoy the audio portion
of a desired source. The audio can be experienced through the use of Infrared
Headphones or with the integrated wireless FM Modulator

FM Modulator Playback

To listen to the audio portion of the viewed source though the vehicle's
stereo system aim the remote at the driver's side monitor and simply press the
FM SOURCE button to turn the FM modulator on. The screen will now display
FM SOURCE: DRIVER DVD. The Audio portion of the source originating from
the Driver's side headrest will now be audible through the vehicle's stereo. If a
different audible source is desired, press the FM SOURCE button again to select
from PASSENGER DVD, EXT AUX, and OFF. Once the desired audible source
has been selected, the transmitting frequency the FM modulator transmits on
can be changed by pressing the FM FREQ button on the remote. Tune the vehi-
cle's radio to the corresponding station to listen to the source that is displayed
on the driver's side monitor.
To change the transmitting frequency, aim the remote at the driver's side
monitor and press the FM FREQ button. Each press of the button advances the
frequency as follows:
FM CH1 88.5MHz FM CH2 88.7MHz FM CH3 88.9MHz FM CH4
89.1MHz FM CH5 89.3MHz FM CH6 89.5 FM CH7 89.7 FM8 89.9
To turn the FM Modulator Off aim the remote at the driver's side monitor and
press the FM SOURCE button repeatedly until FM OFF is displayed.
NOTE: All of the FM Modulator control functions can also be controlled in a
similar fashion using the buttons on the front of the monitor.
15