Nintendo IS-TWL-DEBUGGER Setup Manual page 11

IS-TWL-DEBUGGER Setup
4. Check that the power switch on the main
unit is off.
5. Connect the controller to the main unit.
Connect the plug with the red band to the
lower plug and the plug with the black band
to the upper plug. Be sure to tighten the
connector screws.
6. Connect the antenna to the ANTENNA
connector on the back panel of the main unit.
© 2008-2009 Nintendo
CONFIDENTIAL
Step Illustration
11 TWL-06-0024-001-E
Released: March 17, 2009