Page 1
TOOLS REQUIRED: Screwdriver, Hammer or Mallet For questions or concerns, please call Safco Consumer Hot Line 1-800-664-0042 available Monday-Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators) ASSEMBLED UNIT 5390-37: 1 of 4; Rev. 3: 11/04 Safco Products Company, New Hope, MN 55428...
Page 2
Tap two J Wood Dowels into the holes located Brakes to the two corners along one long edge next to the Screw Posts as shown. using four M Small Screws per Caster. 5390-37: 2 of 4; Rev. 3: 11/04 Safco Products Company, New Hope, MN 55428...
Page 3
Gently tap the upper end of the Rails to seat the dowels. Use a screwdriver to fasten the Cams by turning them clockwise until they stop. Safco Products Company, New Hope, MN 55428 5390-37: 3 of 4; Rev. 3: 11/04...
Page 4
Place the P Plastic Bins into the upper compartment so the side handles rest on top of the Rails. Insert your file folders into the Bins. ASSEMBLED UNIT 5390-37: 4 of 4; Rev. 3: 11/04 Safco Products Company, New Hope, MN 55428...
Need help?
Do you have a question about the 5390 and is the answer not in the manual?
Questions and answers