Geist Watchdog Wi Instruction Manual page 52

52 Geist Watchdog Wi Instruction Manual
Default Route
Http Port
IPv6 Settings- Configure these fields if the Watchdog Wi is communicating via IPv6. You
do have the option in this section to use DHCP. If you do choose to enable DHCP, DHCP
will override any static options you configure.
DHCPv6
Static Address
Static Router
Prefix Length
Time
The Watchdog Wi has an onboard clock that timestamps alarms and other logged
events. If you'd like, you can set the onboard clock manually. If you configure the Network
Time Protocol (NTP) settings, the NTP server will automatically adjust the time of the
onboard clock and keep it in synch with the time reported by the NTP server. NTP
maintains a high level or accuracy and reliability in time stamped events.
Figure 4-23 Time Configuration
GM1212 Geist Watchdog Wi Instruction Manual
The Watchdog Wi is shipped with a default Gateway Route of
192.168.123.1. Contact your IT Department for an appropriate
Default Gateway, if you wish to change this field.
Some ISPs use alternate http ports as an added security
measure. Edit this field in accordance with your ISPs security
settings. Default: 0 = Port 80
Click the Enable button to enable DHCP for IPv6. Enabling
IPv6 will override any static address information saved in the
IPv6 fields.
If you choose not to use DHCP, Enter a static IPv6 address
in this field.
Enter static router information here.
If the static address has a prefix, enter the bit length of the
prefix here.
© 2017