Making A Call; Answering A Call - BlueParrott Xpressway II User Manual

MAKING A CALL

If you have not paired the headset and phone together yet, you must do so (page 11).
1. Turn on your cell phone. Be sure the Bluetooth option is enabled on your phone (refer to your
phone's user guide for instruction).
2. Put headset on and properly position the microphone (page 6). To turn headset on, press
MFB for 2-3 seconds. The headset will automatically attempt to connect with the last device
it was paired or connected with. Once connected, you should hear the voice prompt, "Your
headset is connected."
3. Dial the phone and make a call as usual. Or use the headset's Voice Dial function (page 20)
to make a call.
4. To end call, quickly press the MFB on the headset and release. You will hear a voice prompt,
"Call terminated." The call will end and the headset will enter Standby Mode.
VXi BlueParrott ® Xpressway II User Guide
203321_Xpressway_II_UserGuide_11-20-12.indd Spread 9 of 16 - Pages(17, 18) 203321_Xpressway_II_UserGuide_11-20-12.indd Spread 9 of 16 - Pages(17, 18)
In order to answer a call, the headset must be in Standby Mode (page 10).
17
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

ANSWERING A CALL

1. Put headset on. Position the microphone (page 6).
2. When your cell phone rings, you will hear ring tones in the headset. Answer the call by
quickly pressing the headset's MFB and release. You will hear 2 rising tones and the MFB
button will blink blue every second.
3. To end the call, quickly press the MFB on the headset and release. You will hear a voice
prompt, "Call terminated," and the headset will enter Standby Mode.
18
VXi BlueParrott Xpressway II User Guide
®
11/20/2012 10:16:42 AM 11/20/2012 10:16:42 AM