Transfer Audio; Automatic Bluetooth Connection; Reset Paired Devices List - BlueParrott Xpressway II User Manual

Table of Contents

Advertisement

ADDITIONAL FUNCTIONS
NOTE: Your cell phone must support the following functions (consult the phone owner's manual).

TRANSFER AUDIO

To transfer audio from the headset to the cell phone while on a call, press and hold the Volume Down
button for 1-2 seconds. The audio will transfer to the phone; repeat to transfer audio back to the
headset. When audio is transferred to the phone, the light on the headset will be off until the audio is
transferred back to the headset.
TURN HEADSET INDICATOR LIGHTS ON/OFF
A quick press of both the Volume Up and Volume Down buttons at the same time will turn the headset
indicator lights off, repeat to turn the indicator lights on. When powering on the headset, the indicator
lights will be in the same state as they were when last powered off.

AUTOMATIC BLUETOOTH CONNECTION

When the headset is powered on, it will automatically attempt to connect to the last device it was
paired with. If the headset was paired with multiple devices and the last connected device is not
available (turned off, out of range,etc.), the headset will attempt to connect to the second to the last
device it was connected to, etc. It is also possible to reconnect to the device with a quick press of the
headset's MFB. A tone and the voice prompt, "Your headset is connected," will be heard and the two
devices should connect.
VXi BlueParrott
®
Xpressway II User Guide
203321_Xpressway_II_UserGuide_11-20-12.indd Spread 11 of 16 - Pages(21, 22)
203321_Xpressway_II_UserGuide_11-20-12.indd Spread 11 of 16 - Pages(21, 22)
The headset must be on to perform this function.
To reset the headset's internal paired devices list, hold the headset near your ear. Press and hold
the Volume Up and the Volume Down buttons simultaneously for approximately 5-6 seconds until
two low tones are heard.
This procedure may be necessary if the headset will not pair or connect to a device.
NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will
need to be paired to the device after reset has occurred.
21
22
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

RESET PAIRED DEVICES LIST

VXi BlueParrott
Xpressway II User Guide
®
11/20/2012 10:16:43 AM
11/20/2012 10:16:43 AM

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for BlueParrott Xpressway II

Table of Contents