BlueParrott Xpressway II User Manual page 6

PAIRING WITH A PHONE
Keep headset and phone no less than 3 inches and no more than 3 feet apart while pairing. Keep
other Bluetooth devices at least 50 feet away, or turn them off. NOTE: The headset can be paired
with up to 8 different devices but can only be connected to one at a time. It can only switch back
and forth between 2 devices in Multipoint Mode.
1. Turn headset off (page 10).
2. Press the MFB until the light rapidly flashes blue and you hear the audio prompt "Power On"
and keep holding until you hear "Discovering." IMPORTANT: Wait for all audio prompts and
the blue, rapidly flashing light. This may take up to 8–10 seconds. Release the MFB.
3. Put your cellular phone into Bluetooth Search/Scan Mode per the manufacturer's instructions.
4. Wait while the devices discover each other: This could take up to 2 minutes. Once the phone
discovers the headset, select "Pair" and enter a passcode of "0000" if instructed. Once pair-
ing is complete the headset's rapid blue light will stop flashing and the phone will prompt
you to 'connect' to the headset. Enter "Yes" on the phone to connect to the headset. When
connected, you'll hear the voice prompt, "Your headset is connected," and the
blue light will flash slowly (once every 3-4 seconds), indicating that the head-
set is in Standby Mode and ready to make or receive calls.
VXi BlueParrott ® Xpressway II User Guide
203321_Xpressway_II_UserGuide_11-20-12.indd Spread 6 of 16 - Pages(11, 12) 203321_Xpressway_II_UserGuide_11-20-12.indd Spread 6 of 16 - Pages(11, 12)
Keep headset and computer no less than 3 inches and no more than 3 feet apart while pairing.
Keep all other Bluetooth devices at least 50 feet away, or turn them off.
1. Turn headset off (page 10).
2. Open the computer's Bluetooth connection manager.
3. Put headset into pairing mode (page 11).
4. Instruct Bluetooth connection manager application to discover Bluetooth device.
5. Wait while the devices discover each other. This could take up to 2 minutes. Once paired, the
6. After pairing is complete, a headset icon will appear in the computer's Bluetooth connection man-
7. To disconnect, use the mouse to right click on the headset icon and select "disconnect" or power
11 12
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281
PAIRING WITH A COMPUTER
Enter passcode "0000" when prompted.
headset's blue light will flash.
ager window. To connect the headset, use the mouse to right click on the headset icon and select
"connect." Once connected you should hear the voice prompt, "Your headset is connected."
off the headset. If you select "disconnect" you should hear the voice prompt, "Your headset is
disconnected."
VXi BlueParrott Xpressway II User Guide
®
11/20/2012 10:16:41 AM 11/20/2012 10:16:41 AM