Chrysler 200 2015 User Manual page 91

NOTE:
In the Clock Setting Menu you can also select Display Clock. Display Clock turns the clock
display in the status bar on or off.
Equalizer, Balance And Fade
To adjust the Audio settings:
1. Push the + MORE button on the faceplate, then press the "Settings" button on the touch-
screen.
2. Scroll down and press the "Audio" button on the touchscreen to open the Audio menu.
The Audio Menu shows the following options for you to customize your audio settings.
Equalizer
• Press the "Equalizer" button on the touchscreen to adjust the Bass, Mid and Treble. Use the "+"
or "–" button on the touchscreen to adjust the equalizer to your desired settings. Press the
"back arrow" button on the touchscreen when done.
Balance/Fade
• Press the "Balance/Fade" button on the touchscreen to adjust the sound from the speakers.
Use the "arrow" button on the touchscreen to adjust the sound level from the front and rear or
right and left side speakers. Press the Center "C" button on the touchscreen to reset the
balance and fade to the factory setting. Press the "back arrow" button on the touchscreen
when done.
Speed Adjustable
• Press the "Speed Adjusted Volume" button on the touchscreen to select between OFF, 1, 2 or
3. This will decrease the radio volume relative to a decrease in vehicle speed. Press the "back
arrow" button on the touchscreen when done.
Loudness
• Press the "Loudness" button on the touchscreen to select the Loudness feature. When this
feature is activated it improves sound quality at lower volumes. Press the "back arrow" button
on the touchscreen when done.
Radio Operation
Seek Up /Seek Down
• Press the up or down button to seek through radio stations in AM, FM or SXM bands.
• Hold either button to bypass stations without stopping.
Store Radio Presets Manually
The Radio stores up to 12 presets in each of the Radio modes. Four presets are visible at the top
of the radio screen. Pressing the "All" button on the touchscreen on the radio home screen will
display all of the preset stations for that mode.
E L E C T R O N I C S
89