Setting Up A Replacement Help Button - Philips Lifeline 7000C Instructions For Use Manual

Setting up a replacement Help Button

If you receive a replacement Help Button, you will need to set it up to
work with your Home Communicator. You'll need to be within arm's
reach of the Home Communicator to set up your replacement Help
Button.
If more than one Help Button is used in your home, gather them all for
this process. You will need to reprogram them all, even if you are only
replacing one of them.
1. Make sure that your Home
Communicator is ON and that you have
your replacement Help Button in hand.
2. PRESS and HOLD DOWN the Message
button on the Home Communicator.
The Home Communicator will beep
and announce: "Continue to hold the
Message button for AutoLearn. When
you are ready for Range Test, please release the Message button."
Do not release the Message button until you get to Step 5.
3. Continue to hold down the Message button on your Home
Communicator. With your other hand, press the Help Button until you
hear a long beep and a voice announcement saying: "Your Lifeline Help
Button is now auto-learned and ready to use." This will indicate that
the Help Button is working with the Home Communicator.
4. After you've heard the announcement, release the Help Button.
5. Repeat steps 3 and 4 to reprogram all the other Help Buttons in your
home. Then, release the Message button on the Home Communicator.
The Home Communicator will announce: "Please press the flashing
19