Philips Lifeline 7000C Instructions For Use Manual page 10

A Signal Range Test will determine your coverage range, which is the
distance you can move away from your Home Communicator and still
call for help. If you press your Help Button outside of your apartment,
but still in range of the Home Communicator, help will be sent to the
location of the Home Communicator (i.e., your apartment).
Signal Range Test
You should conduct a Signal Range Test during initial installation
and, if you move your Home Communicator to a different location in
your home.
1. Make sure that your Home Communicator is ON and that you have
your Help Button in hand.
2. PRESS and HOLD DOWN the Message button. The Home
Communicator will beep and announce: "Continue to hold the
Message button for AutoLearn. When you are ready for Range Test,
please release the Message button."
3. Release the Message button. The Home Communicator will announce:
"Please press the flashing orange Message button after you have
completed the range test. Begin Signal Range Test."
4. Press your Help Button. The Home Communicator will beep and the
light on your Help Button will flash green to indicate that the Home
Communicator has received the signal.
5. Move to other parts of your home and press your Help Button again.
Listen for the beep and check to see if the green light is flashing.
6. Once you have tested different locations in your home and
immediately outside your home, return to the Home Communicator
and press the flashing orange Message button.
10