Replacing The X_Cell Battery; Care And Maintenance - miCoach X_CELL User Manual

4. Replacing the X_CELL Battery

The miCoach X_CELL battery should last for over 5 months in active mode and 18 months in
inactive mode. This is equal to 150 hours of active life (5 months of one hour per day usage at
20°C). The X_CELL uses a CR2032 coin cell battery that is commonly used for cameras and
watches. It can be purchased at most electronic stores.
1. Place the X_CELL on a clean, flat surface.
2. Turn the back cover to the left, and use a coin to help remove the battery door.
3. Remove the old battery
4. Insert the new CR2032 battery, ensuring the + sign on the battery is facing toward you.
5. Close the back cover by turning it to the right and aligning the two green dots.

5. Care and Maintenance

Un-snap the miCoach X_CELL from the Textile Transmitter Strap. Make sure to take care when
removing the miCoach X_CELL, pulling it straight off is recommended. Failure to remove the
device from the strap may result in corrosion of the connectors and deteriorated performance of
the X_CELL.
12