Cisco AIR-AP1542I-*-K Installation Manual page 20

Hardware Features
Figure 1-2 Ports and Reset Button on the Base of the AP
1
1
Console port.
The console port is shipped with a covering cap on it.
Inspect the cap at the time of installation. Every time the
cap is removed or replaced, properly tighten it. If you do
not tighten properly, it will not meet IP67 criteria, and
may lead to water leaking into the unit.
2
Reset button with the status LED in its center.
Figure 1-3 Grounding Pad on the Left Side of the AP
Cisco Aironet 1540 Series Outdoor Access Point Hardware Installation Guide
1-4
2
Grounding pad on the
left side of AP
3
3
PoE-In port.
Chapter 1 Overview