BenQ MX731 User Manual page 18

1. Do one of the following steps to display the keystone
correction page.
• Press / on the projector or remote control.
• Press QUICK INSTALL on the remote control. Press
highlight 2D Keystone and press OK.
• Go to Advanced Menu - Display > 2D Keystone and
press OK.
2. After the 2D Keystone correction page displays. Press
correct keystoning at the top of the image. Press
image. Press on the projector to correct keystoning at the right side of the image. Press
the projector to correct keystoning at the left side of the image.
3. When 2D Keystone correction page displays, you can also do the following settings:
• Press AUTO to reset the keystone values.
• Press / to disable the auto vertical keystone function.
Auto Vertical Keystone function
• Go to Advanced Menu - Display > Auto Vertical Keystone and press OK to turn on the
auto vertical keystone function. The image keystoning is corrected automatically and the keystone
value displays.
• Press / to disable the function.
Adjusting Corner Fit
This function is not available when there is no input signal. If you wish to use this function when there is no input
signal, activate Test Pattern first.
You can manually adjust four corners of the image by setting the horizontal and vertical values.
1. Do one of the following steps to display the corner fit correction page.
• Press QUICK INSTALL on the remote control. Press
OK.
• Go to Advanced Menu - Display > Corner Fit and press OK.
2. Press / / /
3. Press / to adjust vertical values.
4. Press / to adjust horizontal values.
18 Positioning your projector
to select one corner and press OK.
Press
to
Press
to
to correct keystoning at the bottom of the
to highlight Corner Fit and press
Press
.
.
Press
.
.
on