Description Of The Indicators On The Front And Rear Panels - Huawei EchoLife HG556a Installation Manual And User's Manual

The side panel of the HG556a provides the following interface and button:
2.
One Wi-Fi button:
Note for the Wi-Fi button:
The initial configuration for the Wi-Fi function of the HG556a is Enabled. Press
and hold the WiFi button for less than four seconds to disable the WiFi function.
Press and hold the Wi-Fi button for more than four seconds to enable the WPS
function.
More details about the Wi-Fi button, see 2.4 Connecting the PC to the HG556a Through
Wi-Fi.
One USB interface: connects a USB storage device, such as a USB disk, a printer etc.
1.4 Description of the Indicators on the Front and Rear
Panels
Indicator Color
Message -
Red
HSPA -
Red
Red
Red
Wi-Fi -
Red
Red
Red
DSL -
Red
Red
Red
POWER -
Red
LAN -
Green
Red
User Manual
Status Meaning
Off There is no message.
On There is an incoming message.
Off The HSPA module is not connected or used.
Blinking slowly The HSPA connection is normal and data
connection is being established.
Blinking quickly The HSPA connection is normal and voice
connection is being established.
On The connected HSPA module works normally.
Off The Wi-Fi network is not activated.
Blinking slowly The Wi-Fi Protected Setup (WPS) process is in
progress.
On The Wi-Fi connection is in good condition.
Blinking quickly The Wi-Fi connection is normal and data is being
transmitted on the link.
Off The ADSL connection is not activated.
Blinking slowly The ADSL connection is in process.
On The ADSL connection is in good condition.
Blinking quickly DSL synchronization is in progress.
Off The HG556a is powered off.
On The HG556a is powered on.
Off There is no Ethernet connection.
On The Ethernet connection is in good condition.
On The LAN connection is not connected.
6