Hspa - Huawei EchoLife HG556a Installation Manual And User's Manual

Table 3-4 lists the parameters for WiFi parameters.
Table 3-4 Parameters for WiFi parameters
Item
Enabled/Disabled
Select channel
Name of SSID1
Mask SSID1
Security
NOTE
WLAN = Wireless Local Area Network
SSID = Service Set Identifier
AP = Access Point

3.4.5 HSPA

Choose Vodafone DSL Router > HSPA in the navigation tree to display the HSPA page.
Figure 3-8 shows the HSPA page.
Figure 3-8 HSPA page
Table 3-5 lists the parameters for the HSPA.
User Manual
Description
To enable or disable the Wi-Fi function.
Select a proper channel from the list that conforms to the
network settings.
The name of the WLAN. It identifies the different networks.
Wireless clients must have the same SSID as that of the AP to
communicate with each other.
It is used to hide or display the AP. If the AP is hidden, the
HG556a does not carry the SSID information when broadcasting
beacon packets. When the wireless client connects to the
HG556a, the SSID needs to be entered manually.
It is used to enable or disable the network authentication
function.
None: Any wireless device can access the WLAN.
WEP: The simplified Shared authentication mode. The HG556a
encrypts all the communications by using the WEP key.
WPA-PSK: The simplified WPA authentication mode. The HG556a
encrypts all the communications by using the WPA pre-shared key.
WPA2-PSK: The simplified WPA2 authentication mode. The HG556a
encrypts all the communications by using the WPA2 pre-shared key.
19