Whyte Getta-Grip Seat Clamp; General Lubrication; Servicing - Whyte C-7 Ridgeway Men’s Supplementary Service Manual

5.2: WHYTE INTER-GRIP or VERTI-GRIP SEAT CLAMP
Point Description
M6 x 30mm
1 Capscrew
threads
5.3: GENERAL WHYTE LUBRICATION
For the correct lubrication regime and maintenance of all parts on a Whyte bicycle, please
refer to the specific component manufacturers detailed instructions bundled with this man-
ual or for further information visit the specific manufacturers website.
6.0

SERVICING:

6.1

Whyte Getta-Grip Seat Clamp

Reference figure 3 on page 12.
Tools required: 1 off 2mm A/F Allen Key
To disassemble, first release the Quick Release (QR) Lever (3) and unscrew the Adjuster
(7) from the Stud (8). Withdraw the QR Lever assembly whilst holding the T-Pad (9) in
place, so that it doesn't fall into the seat tube (5). Remove the Band (6) from the Seat
Tube (5). Remove the T-Pad (9) from the Seat Tube (5). To disassemble the QR Lever,
using the 2mm A/F Allen Key undo the Grub Screw (1) from the Lever Cam (2). The Stud
(8) may now be unscrewed from the Lever Cam (2).
Page 16
WHYTE Service Manual
Figure 5: Capscrew Lubrication
SKF LGEP2 or Castrol Spheerol AP3 or Finish
Line Teflon White Lithium Complex grease
Lubricant
Lubrication
Interval
Once a Month
2018 Edition 1