Arx-1500 Connectors; Arx-2000 Connectors - F5 ARX-VE Planning Manual

Chapter 1
Site Planning

ARX-1500 Connectors

Table 1.18 ARX-1500 Cable Connectors
Interface Connector
Console (labeled RJ-45
CONSOLE on back of
switch)
Management (labeled RJ-45
MGMT on back of
switch)
Gigabit Ethernet (on RJ-45
front of switch)

ARX-2000 Connectors

Table 1.19 ARX-2000 Cable Connectors
Interface Connector
Console (labeled RJ-45
CONSOLE on back of
switch)
Management (labeled RJ-45
MGMT on back of
switch)
Gigabit Ethernet (on RJ-45
front of switch)
1 - 52
The ARX-1500 is powered by two power supplies (1+1 redundancy)
system) consisting of two power modules and one power system frame. Two
power modules are recommended for full redundancy and load-sharing. The
power supplies require a 10A / 220VAC input cord, which is provided with
the chassis. The AC outlet to the switch must be properly grounded.
Purpose
Serial port for CLI access
Ethernet port for CLI or GUI access
100/1000BASE-T Ethernet ports for access to client/server
networks
The following table describes the cable connectors used on the ARX-2000.
Purpose
Serial port for CLI access
Ethernet port for CLI or GUI access
100/1000BASE-T Ethernet ports for access to client/server
networks