scala rider G4 User Manual page 12

PAGE 12 / 28
2. With the scala rider G4 headset turned ON, press and hold the Mobile Button
seconds until the Red and Blue Lights begin rapidly alternating.
3. Search for Bluetooth devices on your phone by following the phone's instructions. Consult your
phone's User Manual for more information.
4. After a few seconds the phone will list "scala rider G4" as a discovered device. Select it and follow
your phone's instructions to accept the pairing.
5. When prompted enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the headset will begin flashing slowly in
Blue.
If the Pairing process is not completed within two minutes, the headset will return to Standby mode.
NOTE: Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music (A2DP), even if the phone has
an MP3 player application. Consult your mobile phone's User Manual for more information.
With some mobile phones, you may need to tap the Mobile Button
after pairing is complete. The scala rider G4 will automatically connect to the last phone connected to the
headset.
MAKING AND RECEIVING MOBILE PHONE CALLS
BASIC FUNCTIONS
Answer a call
Reject a call
Terminate a call
Voice Dial
Redial
ADVANCED
FUNCTIONS
3-way: Add/Remove
CHANNEL A headset
to/from phone call
3-way: Add/Remove
CHANNEL B headset
to/from phone call
Tap the Mobile Button
Remain silent for 15 seconds, OR press and hold the Mobile Button
for 3 seconds
Tap the Mobile Button
During Standby, tap the Mobile Button
name of the person you wish to call. This feature is supported only by
mobile phones that include the Voice Dial feature
Tap the Mobile Button
Tap the CHANNEL A button while on a phone call
Tap the CHANNEL B button while on a phone call
to connect the headset to the phone
or speak loudly any word of your choice
and pronounce loudly the
twice
for at least six