Mercedes-Benz E-Class Sedan Supplement Manual page 30

28 Instrument Display and on-board computer
If the engine or transmission are not at operat‐
ing temperature, the multifunction display shows
temperature 3 or 4 in blue. Avoid using the
full engine output during this time.
Example: SETUP in Mercedes-AMG E 43
vehicles
1 Drive system setting (Eco/Comfort/Sport/
Sport+)
2
Steering setting (Comfort or Sport)
3
®
ESP status (On/Off or SPORT handling
mode)
4 ECO start/stop function setting (Active/
Inactive/Off)
5 Transmission position
6 Suspension tuning (Comfort/Sport/Sport+)
Example: SETUP in Mercedes-AMG E 63
vehicles
1 Drive system setting (Comfort/Sport/Sport
+/RACE)
2
Exhaust system (Comfort or Sport)
3
®
ESP status (On/Off or SPORT handling
mode)
4 Transmission position
5 Suspension tuning (Comfort/Sport/Sport+)
Example: G-Meter
While the vehicle is in motion, the G-Meter
shows the forces that are exerted on the vehicle
occupants both laterally and in the direction of
travel. The maximum values appear in red in the
coordinate system.
To reset the G-Meter: press the left-hand
#
side of Touch Control.
Select Yes.
#
Press the left-hand side of Touch Control.
#
If you press and hold the left-hand side of Touch
Control, the function will be reset immediately.