Troubleshooting - Porter-Cable 90550832 Instruction Manual

90550832 PC1800AlREVISED with pcxmvc charger added
REPLACING THE BULB (FIGURES F, G)
WARNING:
replacing the bulb. Such preventative safety measures reduce the risk of personal injury.
CAUTION:
Flashlight Catalog Number
PC1800AL
NOTE: Use only DC5273 Replacement Bulb.
To replace the bulb:
1. Remove the lens cover cap (8) and the
bulb holder (7) as shown in figure F.
2. Pull the bulb (6) out as shown in figure G.
3. Insert new bulb.
4. Reinstall the bulb holder (7).
5. Reinstall the lens cover cap (8).
NOTE: Do not look directly into the light
beam.
PROBLEM
• Light will not illuminate. • Battery not installed properly.
• Battery will not charge.
For assistance with your product, visit our website at www.portercable.com for a list of service
centers, or call the Porter-Cable Customer Care Center at (888) 848-5175.
Shock Hazard. Disconnect battery pack before
Burn hazard. Lens or bulb may be hot immediately after use.
Porter Cable Service Replacement Bulb
F
7
G

TROUBLESHOOTING

POSSIBLE CAUSE
• Battery not charged.
• Light bulb needs replacing.
• Battery not inserted into charger.
• Charger not plugged in.
11
4/27/09 8:14 AM Page 11
Service Part Number Bulb
5140060-17
6
8
POSSIBLE SOLUTION
• Check battery
installation.
• Check battery
charging requirements.
• Replace bulb as
outlined in this manual.
• Insert battery into
charger until LED appears.
• Plug charger into a
working outlet. Refer to
"Important Charging
Notes" for more details.