Removing The M.2-Module (On Mainboard); Insert M.2-Module (On Mainboard) - Fujitsu CELSIUS H970 Operating Manual

Removing and installing components during servicing

Removing the M.2-module (on mainboard)

► Undo the screw (1).
The M.2 module snaps slightly upwards.
► Pull the M.2 module in the direction of the arrow (2) and out of the slot on
the mainboard and remove it from the casing.

Insert M.2-module (on mainboard)

► Insert the M.2 module at a slight angle in the direction of the arrow (1)
into the slot on the mainboard.
► Fasten the M.2 module in place in the slot with the screw (2).
64
1
2
2
1
Fujitsu