7. Level 2 Repair
7-1. Disassembly
1
1) Disjoint REAR screw 4point
1) Be careful not to make scratch and molding damage!
3
1
) Demount slide FPCB connector
1) Beware that you do not damage PBA
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
2
1) After slide open, disassemble side &
bottom of set
2) After slide close, remove the REAR
1) Be careful not to make scratch and molding damage!
1
4
) Demount PBA at FRONT ass'y
1) Beware that you do not damage PBA
7-1