Inserting And Removing The Battery - Gtech WL01 Operating Manual

Inserting and removing the battery

Pull the release lever on the bottom of the
Work Light.
Press the green buttons on the side of the
battery to remove. The battery should be
rotated into position in a hinge-like manner
(as pictured) for both insertion and removal.
6
0911_Work_Light_Manual_with battery_IP43_aw.indd 6
Use the release lever to both disengage and
open the battery door.
The battery door can be closed easily by
pushing the stand until it clicks and locks
into place.
21/07/2017 10:09