Operation And Modes - Gtech WL01 Operating Manual

Operation and Modes

To switch the Work Light on and off press the
green power button. The power button also
cycles through three different light modes.
Charging
To charge the Work Light remove the
battery and plug the charger in. The battery
will be fully charged after 4 hours. Refer to
page 6: 'inserting and removing the battery'.
4
0911_Work_Light_Manual_with battery_IP43_aw.indd 4
1
2
3
The Work Light has 3 light modes.
Mode 1) Low ambient
Mode 2) High ambient
Mode 3) Targeted
The battery is interchangeable between the
Work Light and Gtech Multi. Fully recharge
the battery when removing it from the Work
Light to use on the Multi.
21/07/2017 10:09