Electrical safety: may explode. • Only use batteries and chargers supplied by Gtech. • Do not charge the battery when the surrounding • Never modify the charger in any way. air temperature or the battery pack is below 0°C or •...
Thank you for choosing a Gtech Work Light “I started Gtech to create sensible, easy to use products, which do a great job. Your opinion is important to us. Please take the time to write a review of your new Work Light at Trustpilot.co.uk.
To charge the Work Light remove the The battery is interchangeable between the battery and plug the charger in. The battery Work Light and Gtech Multi. Fully recharge will be fully charged after 4 hours. Refer to the battery when removing it from the Work page 6: ‘inserting and removing the battery’.
Page 5
Adjusting the Work Light To adjust the Work Light raise or lower The Work Light can also be used as a on the hinge. Hinge resistance can be lantern if carried or hung by the handle. increased and reduced by using a coin. Attaching to a Wall Pull the handle downwards to rotate the light The Work Light stand has a hole which can...
Inserting and removing the battery Pull the release lever on the bottom of the Use the release lever to both disengage and Work Light. open the battery door. Press the green buttons on the side of the The battery door can be closed easily by battery to remove.
WARRANTY – TERMS AND CONDITIONS If your Gtech Work Light breaks during the first 12 months, don’t worry, we will mend it for you. Go to www.gtech.co.uk/support or call 01905 345 891 for assistance. WHAT ISN’T COVERED SUMMARY Gtech does not guarantee the repair or •...
Need help?
Do you have a question about the WL01 and is the answer not in the manual?
Questions and answers