Table of Contents
Advertisement
Wireless Remote
Commander
Remove the insulation sheet
before using the Wireless
Remote Commander.
Insulation sheet
DATA CODE button
PHOTO button
SCAN/SLOW button
(PREV/NEXT) button
PLAY button
STOP button
DISPLAY button
Transmitter
START/STOP button
Power zoom lever
PAUSE button
VISUAL INDEX button
////ENTER button
Notes
• Aim the Wireless Remote
Commander towards the remote
sensor to operate your
camcorder.
• Point the remote sensor away
from strong light sources such as
direct sunlight or overhead
lighting. Otherwise, the Wireless
Remote Commander may not
function properly.
• When you are operating the
camcorder with the supplied
Wireless Remote Commander,
your video device may also
operate. In that case, select a
commander mode other than
DVD2 for your video device, or
cover the sensor of your video
device with black paper.
To change the battery of the
Wireless Remote Commander
While pressing on the tab,
inset your fingernail into the
slit to pull out the battery
case.
Place a new battery with the
+ side facing up.
Insert the battery case until it
clicks into place.
Tab
• When the lithium battery
becomes weak, the operating
distance of the Wireless Remote
Commander may shorten, or the
Wireless Remote Commander
may not function properly. In this
case, replace the battery with a
Sony CR2025 lithium battery. Use
of another battery may present a
risk of fire or explosion.
GB
63
Hide quick links:
Advertisement
Table of Contents
