Optional Accessories; Applications; Before Operation; Working Environment - Hitachi NV 50A1 Instruction And Safety Manual

English
OPTIONAL ACCESSORIES... sold separately
○ Sequential Trip Mechanism Kit
(Single shot parts)
○ Pneumatic Tool Lubricant
.8 oz. (25 cc) oil feeder
4 oz. (120 cc) oil feeder
1 quart (1 ltr) can
NOTE: Accessories are subject to change without any
obligation on the part of HITACHI.

APPLICATIONS

<NV83A2, NV65AC>
○ Construction wooden work such as fl oor and wall
framing, roof decking, subfl ooring.
○ Mobile and modular home construction.
○ Making wooden boxes, palletes, and drums.
○ Packing operations in manufacturing plants, and
other types of packing and crating work in general.
<NV50A1>
○ Making wooden boxes, and light pallets.
○ Making wooden furniture, wooden sash, and other
wooden products.
○ Packing operations in manufacturing plants, and
other types of packing and crating work in general.
○ Construction work in general such as prefabricated
houses.
NOTE:
Aluminium nails may bend when used on hard
surfaces.
Test before use.

BEFORE OPERATION

Read section titled "SAFETY" (pages 4 – 8).
Make sure of the followings before operation.

WORKING ENVIRONMENT

● No fl ammable gas, liquid or other fl ammable
objects at worksite.
● Clear the area of children or unauthorized
personnel.
12
(Code No. 876762)
(Code No. 877153)
(Code No. 874042)
(Code No. 876212)
WARNING

AIR SUPPLY

● NEVER use reactive gases or
● Never connect Nailer to pressure which
potentially exceeds 200 psi (13.7 bar 14 kgf/cm
if a regulator fails.
● Never use non relieving coupler on Nailer.
1. Power source
○ Use only clean, dry, regulated compressed air as a
power source for this Nailer.
○ Air compressors used to supply compressed air to
this Nailer must comply with the requirements of
the latest version of ANSI Standard B 19.3 "Safety
Standard For Compressors For Process Industries."
○ Moisture or oil in the air compressor may accelerate
wear and corrosion in the Nailer.
Drain daily.
2. Filter-Regulator-Lubricator
○ Use a regulator with a pressure range of 0 – 120 psi
(0 – 8.3 bar 0 – 8.5 kgf/cm
○ Filter-regulator-lubricator units supply an optimum
condition for the Nailer and extend the Nailer life.
These units should always be used.
Filter ............ The fi lter removes moisture and dirt
mixed in compressed air.
Drain daily unless fi tted with an
automatic drain.
Keep the fi lter clean by regular
maintenance.
Regulator ......The regulator controls the operating
pressure for safe operation of the Nailer.
Inspect the regulator before operation to
be sure it operates properly.
Lubricator .... The lubricator supplies an oil mist to the
Nailer.
Inspect the lubricator before operation
to be sure the supply of lubricant is
adequate.
Use Hitachi pneumatic tool lubricant.
DANGER
other bottled
Explosion may occur.
WARNING
).
2
gases.
)
2