Status Led Indicators - Mackenzie OPM-3SM User Manual

4. QUEUE
The OPM-3SM incorporates a playback queue to manage the order that
messages play. This queue will manage up to 32 pages. Pages are put into the
queue on a first in, first out basis. The queue is compatible with pages from any
of the three page channels and/or the messaging input. The priority input offers
live, or direct, access to the output of the system. A priority page will pause the
playback queue. When the priority session completes, the queue will continue
from where it left off.
5. PRIORITY
The OPM-3SM offers a Priority input to gain immediate access to the public
address system. Activation of priority halts the playback of recorded pages.
When the priority page is completed, the OPM-3SM will resume playback from
the beginning of the message that was interrupted. Priority Activation methods
include Analog Station, Dry Loop and Loop Start. A valid connection via any of
these methods provides direct access to the system. Status of the Record
Activation switches is not relevant.
6. MESSAGING, PRE-RECORDED
The OPM-3SM offers a pre-recorded messaging system for quick and easy
access to standard or frequently used pages. This system allows messages to be
recorded and permanently stored in FLASH memory. Playback is provided via
DTMF command or contact closure. The messaging portion of the OPM-3SM can
store up to 99 messages in 8 minutes of memory.
DTMF Commands
Code Name Description
# End Use this function to stop recording or exit a
command
*0 Stop Stop playing all triggered messages
*3xx Delete Delete message at location xx
*5xx -or- xx Play Play message at location xx to the audio output
*6xx Review Listen to a message through the handset. Audio is
NOT routed to the audio output
*7xx Record Record message into location xx. Recordings may
only be made to empty message locations. To
update a previously recorded message, make sure
to delete it first.
Connect to the messaging system with the desired mode, analog station, dry
loop or loop start. The Message Off Hook LED indicates that you are connected
to the system in Loop Start or Analog Station mode.
A steady tone indicates a correctly executed and accepted command. A fast
busy signal indicates an incorrectly executed command.
15
BACK
The back panel of the OPM-3SM provides all electrical connections to the
device. The connector type and signal descriptions are detailed later in this
manual.
Individual configuration of each audio input / output port is provided next to
each audio input connector.
Volume controls are provided for the BGM input and the audio output.
Flanges are provided on each side of the back panel of the OPM-3SM to
provide strain relief to all the wiring routed to the OPM-3SM.

2.2.1 Status LED Indicators

All Status Indicators are located on the front panel of the unit. The
different groups of LED indicators are described below:
2.2.1.1 System
The System indicators are global indicators that indicate that tell
the user that a particular function is active on any, or all, of the
inputs on the system.
System OK LED – Green indicates unit is ON. Flashing indicates an
error condition, contact the factory for more information should this
occur.
Recording LED - Red, indicates that a recording session is active on
any one of the paging inputs.
Playing LED - Green, indicates that the audio output of the OPM-3SM
is active due to a page playing back, or the priority input being active.
Busy LED - Yellow, indicates that any one of the paging inputs
recording, playing, or in a delay mode. This LED is also active when
a priority announcement is being made.
2.2.1.2 Message input
Messaging Input Off Hook LED - Yellow, indicates the messaging
system is being accessed via a phone circuit. (Loop current flowing)
Messaging Input Level LED - Yellow, indicates audio signal is present
on the Message Input.
2.2.1.3 Priority input
Priority Input Off Hook LED - Yellow, indicates the priority channel is
being accessed via a phone circuit. (Loop current flowing)
Priority Input Active LED - Yellow, indicates the priority channel is
active.
4