Table of Contents
Advertisement
General Safety Instructions
Always follow these basic safety precautions when using the system:
1. Read carefully and understand all instructions.
2. Follow all warnings and instructions marked on the product.
3. DO NOT block or cover ventilation slots and openings.
4. DO NOT place the product in a closed enclosure or cabinet unless proper
ventilation is provided.
5. Never spill liquid on the product or drop objects into the ventilation slots and
openings. Doing so may result in serious damage to the components.
6. Repair or service must be performed by a factory authorized repair facility.
7. A UL/CSA approved power pack is provided.
8. DO NOT staple or otherwise attach the power supply cord to building surface.
9. DO NOT use the product near or in wet or damp places, such as wet basements.
10. DO NOT use extension cords. Install within six feet of a grounded outlet
receptacle.
11. DO NOT install during lightning storm.
12. Never touch un-insulated wires or terminals unless the unit is disconnected from
both power and the rest of the phone system.
13. Use Caution when installing or modifying configuration switches or control lines.
14. The unit must be securely attached to a wall board, rack or table mounted.
CAUTION:
FCC (Part 15) Radio Frequency Interference
The OPM-3SM generates and uses radio frequency energy and if not installed and
used in strict accordance with the manufacturer's instructions, may cause interference
to radio and television reception. Unit complies with the limits for Class A devices in
accordance with the specifications in Subpart J of Part 15 of the FCC Rules. This
testing is designed to provide reasonable protection against such interference.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television reception,
which can be determined by turning the unit off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
-Reorient the radio or TV receiving antenna.
-Relocate the unit with respect to the radio or TV receiver or vice-versa.
-Plug the unit into a different outlet so that it and the radio or TV receiver are on
different branch circuits
-If necessary, the user should consult the dealer or an experienced radio/television
technician for additional suggestions.
i
If any wiring from the system leaves the premises,
you must use proper electrical protectors.
Regulations:
Warranty & Registration Card for the
OPM-3SM - Page Stacker & Feedback Eliminator
Date:________________________
Purchaser:
___________________________________________________
Address:
___________________________________________________
City:
__________________
Phone: __________________
Seller:
_______________________________________________________
Address: _______________________________________________________
City:
__________________
Phone: __________________
Return warranty card via:
FAX: (909) 394-9411
MAIL: Address on reverse side
ONLINE: www.macklabs.com/registration.html
------------------------------------------------------------------------------------------------------------------
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
Serial No.: _______________________
State: ______
Zip:
____________
Fax: __________
Email: ____________
State: ______
Zip:
____________
Fax: __________
Email: ____________
NOTES
20
Advertisement
Table of Contents
