Ide Primary Channel Master; Ide Primary Channel Slave; Ide Secondary Channel Master; Ide Secondary Channel Slave - Acer Altos 500L User Manual

IDE Primary Channel Master

This parameter specifies the current configuration of the IDE device
connected to the master port of the primary IDE channel.

IDE Primary Channel Slave

This parameter specifies the current configuration of the IDE device
connected to the slave port of the primary IDE channel.

IDE Secondary Channel Master

This parameter specifies the current configuration of the IDE device
connected to the master port of the secondary IDE channel.

IDE Secondary Channel Slave

This parameter specifies the current configuration of the IDE device
connected to the slave port of the secondary IDE channel.

Total Memory

This parameter specifies the total amount of onboard memory. The
memory size is automatically detected by BIOS during the POST. If
you install additional memory, the system automatically adjusts this
parameter to display the new memory size.
1st Bank/2nd Bank/3rd Bank
The 1st Bank, 2nd Bank, and 3rd Bank parameters indicate the type
and size of DRAM installed in DIMM sockets 1, 2, and 3 respectively.
The None setting indicates that there is no DRAM installed. For the
location of the DIMM sockets, refer to the System Board Layout in
Chapter 2.
3-6 AcerAltos 500L User's Guide