Memory Upgrade; Memory Configurations - Acer Altos 500L User Manual

Memory Upgrade

The three 168-pin sockets onboard support SDRAM-type DIMMs only.
You may install 16-MB, 32-MB, 64-MB, or 128-MB DIMMs for a
maximum 384-MB system memory.
The SDRAM DIMMs should work under 3.3 volts; 5-volt memory
devices are not supported. Memory modules with a timing setting of
66 MHz are defined under unbuffered DIMM specifications, while 100
MHz modules are defined under Intel PC-100 SDRAM specifications.
Do not use both 66 MHz (unbuffered) and
100 MHz (registered) SDRAM together. It
could cause your system to malfunction.
Each of the sockets represents one independent bank. This allows
you to install DIMMs with different capacities to form a configuration.

Memory Configurations

The table below lists some system memory configurations. You may
combine DIMMs with various capacities to form other combinations.
Bank 0 Bank 1
16 MB
16 MB 16 MB
16 MB 16 MB
32 MB
32 MB 32 MB
32 MB 32 MB
64 MB
64 MB 64 MB
64 MB 64 MB
128 MB
Chapter 2 System Board
Bank 2 Total Memory
16 MB
32 MB
16 MB 48 MB
32 MB
64 MB
32 MB 96 MB
64 MB
128 MB
64 MB 192 MB
128 MB
2-15