Advertisement
Riverside
email: info@riverside-furniture.com
ASSEMBLY INSTRUCTIONS
ITEMS NO. & DESCRIPTION
15340 ENTERTAINMENT CONSOLE
15344 BRIDGE & BACK PANEL
15347 LEFT PIER
15348 RIGHT PIER
Step 13: To set the Door tracking, place the two Spacer Blocks (H19) between the
top edge of the Left Hand Door and bottom edge of the Top Door Track. Hold
down on each Door Roller while also lifting the Door. Tighten the Bolts securing
the Door Roller Assembly to the Door. Repeat for the Right Hand Door.
Step 14. Attach the other three L-Door Stops (H15) at the ends of the tracks
positioned as shown, using the same Bolts and Washers as used to mount the
Upper Door Tracks in Step 9. Slide the two Doors together, adjusting the middle
Door Stops where the Doors touch each other at the middle. Slide each Door to
the outside end of the completed wall assembly, adjusting the Door Stops so the
doors are flush to the outside ends.
Step 15: Slide both Doors together again to check for proper alignment and for
uneven gaps between the doors from the top to the bottom. If the Doors are not
aligned correctly, loosen the bolts attaching one of the Rollers on one Door,
making necessary adjustments and retighten the bolts.
H19
Modern Gatherings
Entertainment
FURNITURE
Assembly Instructions
Made in Viet Nam
H7
H14
H15
H23
Note:
The Door Stops (H15) are made with slotted
mounting holes. Install the outside Door Stops
where the outside edge of each Door overlaps
the End Panel slightly. Install the two middle
Door Stops where the Doors will barely touch
each other in the middle of the unit.
Page 11 of 14
H21
H12
Advertisement
