Page 1
HARVIL 3-IN-1 POKER TABLE ASSEMBLY INSTRUCTIONS NGD2350/NGD2365...
Page 2
THANK YOU! Thank you for your purchase of this Harvil product. We work around the clock and around the globe to ensure that Harvil products maintain the highest possible quality. However, in the rare instance that your product is defective or missing parts, contact your retailer to submit parts requests or warranty claims.
ASSEMBLY TIPS 1. Find a clean, level surface to begin the assembly of your game table. The table will be partially assembled upside down and then turned over onto its legs. This is a heavy game and turning it over will require at least two strong adults. 2.
Page 6
ASSEMBLY INSTRUCTIONS TABLE 1. Attach PLATE #4 to PEDESTAL #3 with NUT #10 and FLAT WASHER #8. 2. Attach assembled PEDESTAL to the bottom of the TABLE BODY #1 with BOLT #7 and FLAT WASHER #8. 3. Attach LEGS #2 to PEDESTAL with NUT #10 and FLAT WASHER #8. Thread one LEG LEVELER #11 onto each LEG.
Page 7
ASSEMBLY INSTRUCTIONS CHAIRS 1. Attach BACK FRAME #16 to SEAT FRAME #17 with one 1-3/4" BOLT #30 and one 16mm FLAT WASHER #28 and four 3" BOLTS #31 and four 16mm FLAT WASHERS #28 as shown. 2. Attach RIGHT ARMREST #18A and LEFT ARMREST #18B to SEAT FRAME with 1-3/4"...
Page 8
ASSEMBLY INSTRUCTIONS (CONT.) CHAIRS 5. Attach one CASTER WHEEL #34 to each leg of the BASE #22 as shown. Attach BASE CAP #23, SEAT LIFT #25 and LIFT COVER #24 to BASE #22 and SEAT AD- JUSTER #26 as shown. 6.
CONGRATULATIONS! You have now assembled your Harvil Game Table. Please note the Care and Use instructions below to ensure years of trouble free use of your game table. CARE AND USE 1. This product is intended for INDOOR use only.
Need help?
Do you have a question about the NGD2350 and is the answer not in the manual?
Questions and answers