Table of Contents
Advertisement
▼
Press [+] at menu 2.
Press [-] at menu 3.
3.2 System Menu 1
Selects unit of depth
DEPTH UNIT:
measurement among meters, feet, or
fathoms. Default setting is meters.
If "ft" or "fa" is selected, the depth unit is
shown in red characters.
Selects unit of speed
SPEED UNIT:
measurement among knots, statute miles
per hour, or kilometers per hour. Default
setting is knots. Requires speed data, from
external device.
Selects heading reference; true
COURSE:
or magnetic. Default setting is TRUE.
BOTTOM LOST
loss warning. ALARM sounds the alarm
"
if the bottom signal is not detected. Default
setting is ALARM (alarm is enabled).
"
: Turns on or off the bottom
"
"
The audible alarm may be
GPS ALARM:
released when the position-fixing mode is
switched from DGPS to GPS and vice versa.
Default setting is ALARM (alarm is
enabled). Choose OFF if you do not need
to be alerted with the audible alarm when
the position-fixing mode is switched.
INTERFACE:
Selects I/O signal format
between the FE-700 and external equipment;
IEC format 1:95 (1995 version) or 1:98
"
"
(1998 version), or NMEA format. Default
setting is IEC 1:98 .
"
When selecting the 1:98 , DPT has max.
range in use (See page 24).
OS DATA
: Selects own ship data display
mode; DATA 1 or DATA 2. DATA1 is the
default setting.
If a navigation device is not connected to the
FE-700, select DATA 2.
LANGUAGE:
Currently English is only
available.
"
"
"
"
"
"
"
"
"
Advertisement
Table of Contents
